ProTaper control components are crafted to give you the edge in precision and responsiveness. From levers to throttle tubes, these control parts are made from durable materials that ensure reliable performance and longevity. Engineered for easy installation and smooth operation, ProTaper control components elevate your riding experience to deliver top-notch performance and reliability.
Using the latest in grip technology and molding techniques, the Clamp-On Grip System offers the comfort and control of traditional grips with the added advantage of quick, effortless installation. A design that eliminates the need for glue and tie-wire, yet ensures durable, slip-free performance. The super-slim clutch-side windowed core not only minimizes the outer grip diameter, but also delivers critical relief areas for the palm and fingertips. The result is increased impact and vibration damping over solid-core designs, leading to improved rider comfort and control. The grip surface utilizes an extra-supple, tacky compound that is seamlessly molded to the inner core. This provides maximum comfort and traction while alleviating palm abrasions and blistering. A firmer compound is used in the flange and end cap areas to resist crash damage and reduce wear. Easy on and easy off Low-profile CNC-machined aluminum clamp Dual Compound Technology for comfort and durability Exclusive clutch-side windowed design
The Micro Bar makes use of an advanced, abrupt taper to achieve a smaller diameter in the handgrip areas while maintaining the standard 7/8 in. throughout the rest of the bar. With the reduced diameter handgrip area, youth riders are able to grip the handlebars more fully and comfortably. This leads to improved control and drastically reduced hand fatigue, giving younger riders the opportunity to ride to their full potential 7/8 in. tubing at the clamping area Reduced diameter handgrip area, perfect for small hands Exclusive 2000 series T6 aluminum alloy handlebar construction Cold-forged aluminum crossbar CNC-machined 6061 aluminum crossbar clamps adhered with aerospace-quality polymer High-tech shot peened, stress relieved, and anodized handlebar finish for unmatched durability Clutch side handlebar knurling provides maximum grip adhesion Chemically applied handlebar graphics are scratch and peel resistant Includes crossbar pad
The 2.3 Platform Foot Pegs from ProTaper have a unique replaceable cleat design to ensure you are getting the top performance out of your foot pegs. The two piece platform system allows three levels of adjustment, and is made from 7075 hard anodized billet aluminum replaceable cleats
Slim, low-profile Cross Pivot System is virtually unbendable. CNC-machined lever clevis lends an exact fit. Tool-less lever reach adjustment dial offers 20mm of tunability. Fitted rubber boot keeps XPS assembly debris free. 6061-T6 precision, forged aluminum blade. Application specific main rubber boot included. Manufacturer's lifetime warranty against bending.
Direct O.E.M. replacement, but with high quality billet aluminum instead of cheap plastic. Inside the Pro Taper aluminum throttle tube is teflon coated to reduce friction between the tube and your handlebar. A knurled finish provides a solid bond between tube and grip. CNC-machined aluminum tubes Inside tubing is Teflon® coated for smooth operation Must purchase ProTaper® Twister Tube Insert when using with Renthal®®Twinwall, Tag/Moose handlebars or when mounting wraparound handguards.
The Twister Throttle Tube from ProTaper is constructed from quality anodized billet aluminum. The sealed radial ball bearing and polymer bushing allow for a consistent and smooth throttle operation while a knurled grip mounting area ensures a vice-like grip bond. The ProTaper Twister Throttle tubes are used by top-level pro teams and riders world wide. Twister Throttle Tubes are compatible with all ProTaper handlebars and Renthal 7/8 in. handlebars with the standard bearing insert. Features a sealed ball bearing that virtually eliminates friction and nylon sleeve bearing on the inboard end Crud plug stops grip glue form ruining bearing All Twister throttle tubes include a free insert for all ProTaper® bars
ProTaper's titanium footpegs feature a unique open structure design for ultimate self-cleaning capabilities. Utilizes OEM mounting hardware for ease of installation. Aerospace Grade 5 Titanium Construction Ultra-light weight, 350g per pair Over 2x stronger than steel and 3.5x stronger than aluminum Highest strength-to-weight ratio of any metal Titanium alloyed with aluminum and vanadium for wear and corrosion resistance
Direct O.E.M. replacement, but with high quality billet aluminum instead of cheap plastic. Inside the Pro Taper aluminum throttle tube is teflon coated to reduce friction between the tube and your handlebar. A knurled finish provides a solid bond between tube and grip. CNC-machined aluminum tubes Inside tubing is Teflon® coated for smooth operation Must purchase ProTaper® Twister Tube Insert when using with Renthal®®Twinwall, Tag/Moose handlebars or when mounting wraparound handguards.
ProTaper's Titanium footpegs feature a unique open structure design for ultimate self-cleaning capabilities. Utilizes OEM mounting hardware for ease of installation. Aerospace Grade 5 Titanium Construction Ultra-light weight, 350g per pair Over 2x stronger than steel and 3.5x stronger than aluminum Highest strength-to-weight ratio of any metal Titanium alloyed with aluminum and vanadium for wear and corrosion resistance
Upgrade or replace damaged O.E.M. rubber cones with ProTaper's high performance polyurethane bar mount cones. Built to resist crash damage. Maintains vibration-reducing properties with an improved feel and durability over stock rubber bar mount cones.
The Twister Throttle Tube from ProTaper is constructed from quality anodized billet aluminum. The sealed radial ball bearing and polymer bushing allow for a consistent and smooth throttle operation while a knurled grip mounting area ensures a vice-like grip bond. The ProTaper Twister Throttle tubes are used by top-level pro teams and riders world wide. Twister Throttle Tubes are compatible with all ProTaper handlebars and Renthal 7/8 in. handlebars with the standard bearing insert. Features a sealed ball bearing that virtually eliminates friction and nylon sleeve bearing on the inboard end Crud plug stops grip glue form ruining bearing All Twister throttle tubes include a free insert for all ProTaper® bars
ProTaper's Titanium footpegs feature a unique open structure design for ultimate self-cleaning capabilities. Utilizes OEM mounting hardware for ease of installation. Aerospace Grade 5 Titanium Construction Ultra-light weight, 350g per pair Over 2x stronger than steel and 3.5x stronger than aluminum Highest strength-to-weight ratio of any metal Titanium alloyed with aluminum and vanadium for wear and corrosion resistance
Direct O.E.M. replacement, but with high quality billet aluminum instead of cheap plastic. Inside the Pro Taper aluminum throttle tube is teflon coated to reduce friction between the tube and your handlebar. A knurled finish provides a solid bond between tube and grip. CNC-machined aluminum tubes Inside tubing is Teflon® coated for smooth operation Must purchase ProTaper® Twister Tube Insert when using with Renthal®®Twinwall, Tag/Moose handlebars or when mounting wraparound handguards.
Direct O.E.M. replacement, but with high quality billet aluminum instead of cheap plastic. Inside the Pro Taper aluminum throttle tube is teflon coated to reduce friction between the tube and your handlebar. A knurled finish provides a solid bond between tube and grip. CNC-machined aluminum tubes Inside tubing is Teflon® coated for smooth operation Must purchase ProTaper® Twister Tube Insert when using with Renthal®®Twinwall, Tag/Moose handlebars or when mounting wraparound handguards.
ProTaper's Titanium footpegs feature a unique open structure design for ultimate self-cleaning capabilities. Utilizes OEM mounting hardware for ease of installation. Aerospace Grade 5 Titanium Construction Ultra-light weight, 350g per pair Over 2x stronger than steel and 3.5x stronger than aluminum Highest strength-to-weight ratio of any metal Titanium alloyed with aluminum and vanadium for wear and corrosion resistance
The Twister Throttle Tube from ProTaper is constructed from quality anodized billet aluminum. The sealed radial ball bearing and polymer bushing allow for a consistent and smooth throttle operation while a knurled grip mounting area ensures a vice-like grip bond. The ProTaper Twister Throttle tubes are used by top-level pro teams and riders world wide. Twister Throttle Tubes are compatible with all ProTaper handlebars and Renthal 7/8 in. handlebars with the standard bearing insert. Features a sealed ball bearing that virtually eliminates friction and nylon sleeve bearing on the inboard end Crud plug stops grip glue form ruining bearing All Twister throttle tubes include a free insert for all ProTaper® bars
The Twister Throttle Tube from ProTaper is constructed from quality anodized billet aluminum. The sealed radial ball bearing and polymer bushing allow for a consistent and smooth throttle operation while a knurled grip mounting area ensures a vice-like grip bond. The ProTaper Twister Throttle tubes are used by top-level pro teams and riders world wide. Twister Throttle Tubes are compatible with all ProTaper handlebars and Renthal 7/8 in. handlebars with the standard bearing insert. Features a sealed ball bearing that virtually eliminates friction and nylon sleeve bearing on the inboard end Crud plug stops grip glue form ruining bearing All Twister throttle tubes include a free insert for all ProTaper® bars
Direct O.E.M. replacement, but with high quality billet aluminum instead of cheap plastic. Inside the Pro Taper aluminum throttle tube is teflon coated to reduce friction between the tube and your handlebar. A knurled finish provides a solid bond between tube and grip. CNC-machined aluminum tubes Inside tubing is Teflon® coated for smooth operation Must purchase ProTaper® Twister Tube Insert when using with Renthal®®Twinwall, Tag/Moose handlebars or when mounting wraparound handguards.
Direct O.E.M. replacement, but with high quality billet aluminum instead of cheap plastic. Inside the Pro Taper aluminum throttle tube is teflon coated to reduce friction between the tube and your handlebar. A knurled finish provides a solid bond between tube and grip. CNC-machined aluminum tubes Inside tubing is Teflon® coated for smooth operation Must purchase ProTaper® Twister Tube Insert when using with Renthal®®Twinwall, Tag/Moose handlebars or when mounting wraparound handguards.
The Twister Throttle Tube from ProTaper is constructed from quality anodized billet aluminum. The sealed radial ball bearing and polymer bushing allow for a consistent and smooth throttle operation while a knurled grip mounting area ensures a vice-like grip bond. The ProTaper Twister Throttle tubes are used by top-level pro teams and riders world wide. Twister Throttle Tubes are compatible with all ProTaper handlebars and Renthal 7/8 in. handlebars with the standard bearing insert. Features a sealed ball bearing that virtually eliminates friction and nylon sleeve bearing on the inboard end Crud plug stops grip glue form ruining bearing All Twister throttle tubes include a free insert for all ProTaper® bars
ProTaper's Titanium footpegs feature a unique open structure design for ultimate self-cleaning capabilities. Utilizes OEM mounting hardware for ease of installation. Aerospace Grade 5 Titanium Construction Ultra-light weight, 350g per pair Over 2x stronger than steel and 3.5x stronger than aluminum Highest strength-to-weight ratio of any metal Titanium alloyed with aluminum and vanadium for wear and corrosion resistance
Direct O.E.M. replacement, but with high quality billet aluminum instead of cheap plastic. Inside the Pro Taper aluminum throttle tube is teflon coated to reduce friction between the tube and your handlebar. A knurled finish provides a solid bond between tube and grip. CNC-machined aluminum tubes Inside tubing is Teflon® coated for smooth operation Must purchase ProTaper® Twister Tube Insert when using with Renthal®®Twinwall, Tag/Moose handlebars or when mounting wraparound handguards.
The Twister Throttle Tube from ProTaper is constructed from quality anodized billet aluminum. The sealed radial ball bearing and polymer bushing allow for a consistent and smooth throttle operation while a knurled grip mounting area ensures a vice-like grip bond. The ProTaper Twister Throttle tubes are used by top-level pro teams and riders world wide. Twister Throttle Tubes are compatible with all ProTaper handlebars and Renthal 7/8 in. handlebars with the standard bearing insert. Features a sealed ball bearing that virtually eliminates friction and nylon sleeve bearing on the inboard end Crud plug stops grip glue form ruining bearing All Twister throttle tubes include a free insert for all ProTaper® bars
Direct O.E.M. replacement, but with high quality billet aluminum instead of cheap plastic. Inside the Pro Taper aluminum throttle tube is teflon coated to reduce friction between the tube and your handlebar. A knurled finish provides a solid bond between tube and grip. CNC-machined aluminum tubes Inside tubing is Teflon® coated for smooth operation Must purchase ProTaper® Twister Tube Insert when using with Renthal®®Twinwall, Tag/Moose handlebars or when mounting wraparound handguards.
Direct O.E.M. replacement, but with high quality billet aluminum instead of cheap plastic. Inside the Pro Taper aluminum throttle tube is teflon coated to reduce friction between the tube and your handlebar. A knurled finish provides a solid bond between tube and grip. CNC-machined aluminum tubes Inside tubing is Teflon® coated for smooth operation Must purchase ProTaper® Twister Tube Insert when using with Renthal®®Twinwall, Tag/Moose handlebars or when mounting wraparound handguards.
Direct O.E.M. replacement, but with high quality billet aluminum instead of cheap plastic. Inside the Pro Taper aluminum throttle tube is teflon coated to reduce friction between the tube and your handlebar. A knurled finish provides a solid bond between tube and grip. CNC-machined aluminum tubes Inside tubing is Teflon® coated for smooth operation Must purchase ProTaper® Twister Tube Insert when using with Renthal®®Twinwall, Tag/Moose handlebars or when mounting wraparound handguards.
The Twister Throttle Tube from ProTaper is constructed from quality anodized billet aluminum. The sealed radial ball bearing and polymer bushing allow for a consistent and smooth throttle operation while a knurled grip mounting area ensures a vice-like grip bond. The ProTaper Twister Throttle tubes are used by top-level pro teams and riders world wide. Twister Throttle Tubes are compatible with all ProTaper handlebars and Renthal 7/8 in. handlebars with the standard bearing insert. Features a sealed ball bearing that virtually eliminates friction and nylon sleeve bearing on the inboard end Crud plug stops grip glue form ruining bearing All Twister throttle tubes include a free insert for all ProTaper® bars
The Twister Throttle Tube from ProTaper is constructed from quality anodized billet aluminum. The sealed radial ball bearing and polymer bushing allow for a consistent and smooth throttle operation while a knurled grip mounting area ensures a vice-like grip bond. The ProTaper Twister Throttle tubes are used by top-level pro teams and riders world wide. Twister Throttle Tubes are compatible with all ProTaper handlebars and Renthal 7/8 in. handlebars with the standard bearing insert. Features a sealed ball bearing that virtually eliminates friction and nylon sleeve bearing on the inboard end Crud plug stops grip glue form ruining bearing All Twister throttle tubes include a free insert for all ProTaper® bars
The Twister Throttle Tube from ProTaper is constructed from quality anodized billet aluminum. The sealed radial ball bearing and polymer bushing allow for a consistent and smooth throttle operation while a knurled grip mounting area ensures a vice-like grip bond. The ProTaper Twister Throttle tubes are used by top-level pro teams and riders world wide. Twister Throttle Tubes are compatible with all ProTaper handlebars and Renthal 7/8 in. handlebars with the standard bearing insert. Features a sealed ball bearing that virtually eliminates friction and nylon sleeve bearing on the inboard end Crud plug stops grip glue form ruining bearing All Twister throttle tubes include a free insert for all ProTaper® bars
The EVO Handlebar is ProTaper's flagship unbraced handlebar. This design yields increased flex and impact absorption over conventional handlebars, offering the rider improved comfort and reduced fatigue without sacrificing strength. Using a premium 7000 series aluminum alloy construction and computer-profiled 4mm thick wall design, the EVO Handlebar is up to 25% lighter and 45% stronger than competing handlebars. Made from 4 mm, proprietary, 7000 series aluminum alloy for superior tensile and yield strength Best balance between fatigue life, impact strength and impact absorbing flex High-tech shot peened, stress relieved, and anodized finish for unmatched durability Independent lab tests show that the EVO Handlebars outlast every other handlebar on the market in fatigue life Epoxy inner coating resists corrosion Clutch side knurling provides maximum grip traction Chemically applied graphics are scratch-and-peel resistant Plastic bar end plugs keep the elements out and provide a stronger base for grip ends Weighs only 1.4 lbs. (640 g) Crossbar pad sold separately
The Seven Eighths or SE Handlebar represents the state of the art 7/8 in. handlebar design. Made from high-strength aerospace aluminum alloy rated at 70,000 psi, these handlebars are perfect for riders who prefer solid, predictable feedback Made from 5 mm, proprietary, 2000 series T6 aluminum alloy Crossbar made from cold-forged aluminum Crossbar clamps CNC-machined from 6061 aluminum and adhered with aerospace quality polymer High-tech shot peened, stress-relieved, and anodized finish for unmatched durability Clutch side knurling provides maximum grip adhesion Chemically applied graphics are scratch and peel resistant Plastic end plugs keep the elements out and provide a stronger base for grip ends Weighs only 1.8 lbs. (820g) without pad. Includes crossbar pad
A great value for a bar/pad combo. Knurled clutch side for secure grip hold. 1/4 in. cut guides for precise modification Made from 5 mm, proprietary, 2000 series T6 aluminum alloy for superior tensile and yield strength Most affordable balance between bar fatigue life, impact strength and impact absorbing flex High-tech shot peened, stress relieved, and anodized finish for unmatched durability Clutch side knurling provides maximum grip adhesion Chemically applied graphics are scratch-and peel-resistant Plastic bar end plugs keep the elements out and provide a stronger base for grip ends Weighs only 1.55 lbs. (720g) without pad Includes crossbar pad
The Seven Eighths or SE Handlebar represents the state of the art 7/8 in. handlebar design. Made from high-strength aerospace aluminum alloy rated at 70,000 psi, these handlebars are perfect for riders who prefer solid, predictable feedback Made from 5 mm, proprietary, 2000 series T6 aluminum alloy Crossbar made from cold-forged aluminum Crossbar clamps CNC-machined from 6061 aluminum and adhered with aerospace quality polymer High-tech shot peened, stress-relieved, and anodized finish for unmatched durability Clutch side knurling provides maximum grip adhesion Chemically applied graphics are scratch and peel resistant Plastic end plugs keep the elements out and provide a stronger base for grip ends Weighs only 1.8 lbs. (820g) without pad. Includes crossbar pad
The ProTaper ACF Handlebar uses a revolutionary unidirectional carbon fiber core system to become the first carbon fiber reinforced motocross handlebar. The added strength allows the aluminum tubing wall thickness to be safely reduced in key areas, greatly decreasing weight and producing unrivaled impact-absorbtion. Innovative Control+ design features 220mm of control space or up to 40mm more than conventional 1-1/8 in. handlebars. Control + design provides more space for controls, mapping switches, and electric starters Unidirectional carbon fiber cores reinforce the aluminum tubing and safely reduce wall thickness in key areas Unrivaled impact-absorbing flex Up to 20% lighter than conventional 1-1/8 in. handlebars 7000 series aluminum alloy offers superior tensile, yield, and fatigue strengths Advanced shot-peened, stress-relieved, anodized finish delivers exceptional durability
The Pillow Top, our most popular off-road grip, utilizes an exclusive traction pattern and gel-like vibration-reducing surface compound to maximize grip and comfort. The triple density construction not only creates the perfect bonding interface with the handlebars, but also extends the life of the grip. Vibrasonix Pillow Top dramatically reduces vibration and cushions impact Tacky, gel-like surface compound maximizes grip Inner core compound creates perfect bonding interface with handlebars Anti-Rip tip uses high-durometer compound to extend the life of the grip Designed to self-clean and shed mud away from outer surface
Stylish replacement pad for the Fuzion Handlebar crossbar. High-density, closed-cell foam offers added protection and keeps the elements out. Flat bottom pad design to eliminate pad spin. Pad-to-pad cover engagement alignment tabs
Fuel vent hose cutout aids in steering stem access. High-density, closed-cell foam offers added protection and keeps the elements out. Improved cover design provides a much cleaner appearance. Multiple colors and designs to give your bike that custom look.
The Fuzion Handlebar is a new concept in high-performance control systems. The revolutionary flex locking system allows riders to choose between a stiffer, more controlled handlebar feel or a softer more shock absorbing feel depending on terrain conditions. Changing the bar from "Locked" to "Unlocked" takes only seconds. The bar itself utilizes ProTaper's exclusive aluminum alloy computer profile in a 4 mm wall design for the ultimate in lightweight strength Unlocked function allows the crossbar to telescope and flex like a Contour or EVO Pro Taper handlebar while the locked function connects the crossbar creating solid, definite feedback to the rider Made from 5 mm, proprietary, 2000 series T6 aluminum alloy for superior tensile and yield strength Crossbar made from cold-forged aluminum Crossbar clamps CNC-machined from 6061 aluminum and adhered with aerospace quality polymer High-tech shot peened, stress relieved, and anodized finish for unmatched durability Clutch side knurling provides maximum grip adhesion Chemically applied graphics are scratch and peel resistant Plastic bar end plugs keep the elements out and provide a stronger base for grip ends Weighs only 2.1 lbs. (940g) without pad Includes crossbar pad
The RC (Race Cut) Limited Edition grip was designed and developed specifically for elite AMA Pro Supercross and Motocross racers. Utilizing a unique waffle pattern, incorporating tie-wire cut lines and an extra supple durometer compound, designed to help a riders hands endure the grind of a full moto season. The Race Cut grip can give any rider the edge they need to be a competitive force at the race track week in and week out Half Waffle pattern improves grip and control Extra-supple, tacky compound maximizes comfort, dampens vibration
The Seven Eighths or SE Handlebar represents the state of the art 7/8 in. handlebar design. Made from high-strength aerospace aluminum alloy rated at 70,000 psi, these handlebars are perfect for riders who prefer solid, predictable feedback Made from 5 mm, proprietary, 2000 series T6 aluminum alloy Crossbar made from cold-forged aluminum Crossbar clamps CNC-machined from 6061 aluminum and adhered with aerospace quality polymer High-tech shot peened, stress-relieved, and anodized finish for unmatched durability Clutch side knurling provides maximum grip adhesion Chemically applied graphics are scratch and peel resistant Plastic end plugs keep the elements out and provide a stronger base for grip ends Weighs only 1.8 lbs. (820g) without pad. Includes crossbar pad
The Pillow Top, our most popular off-road grip, utilizes an exclusive traction pattern and gel-like vibration-reducing surface compound to maximize grip and comfort. The triple density construction not only creates the perfect bonding interface with the handlebars, but also extends the life of the grip. Vibrasonix Pillow Top dramatically reduces vibration and cushions impact Tacky, gel-like surface compound maximizes grip Inner core compound creates perfect bonding interface with handlebars Anti-Rip tip uses high-durometer compound to extend the life of the grip Designed to self-clean and shed mud away from outer surface Designed to self-clean and shed mud away from outer surface
Kit features fully adjustable ProTaper triple clamp designed to reduce stock fork flex. Includes a 7 in. rise CroMoly ProTaper® handlebar with pad, throttle cable, brake cable, kill switch, brake lever/perch, ProTaper® Half Waffle grip and throttle house assembly.
Replaces O.E.M. rubber bar mount to accept 1-1/8 in. handlebars. Reversible design provides forward and rear mounting. Precision CNC-machined, aircraft-grade aluminum Utilizes your stock rubber cones Newer model RMZs must use bar mount bushings P/N 342603
Aerospace-grade 6061-T6 aluminum with a shot-peened finish for increased durability. 5 mm wall thickness for maximum strength. 7/8 in. overall diameter
Universal application fits most offroad bikes. Features exclusive XPS lever and Profile Perch assembly. Unique full coverage pivot mount rubber boot keeps pivot bearings and cable clean. 6061-T6 precision-forged aluminum Factory race team-inspired quick adjust star Two lever reach adjustments give 50mm of tunability
Neon Grips feature our super soft, specially formulated synthetic rubber compound. Molded in seven vibrant colors with a racing inspired half waffle grip pattern, Neon Grips blend style and function to let you customize the look of your bike Half Waffle pattern improves grip and control For twist throttle use only
Our exclusive 1/3 Waffle Grip replicates what factory racers and mechanics have been hand-sculpting for years - half waffle grips with one row of the grid pattern removed. This design allows the palms to contact more grip surface area, balancing half waffle traction with full diamond feel. Our softest, tackiest, synthetic rubber compound yet. Optimized use of the traditional waffle/diamond pattern grip design Three evenly spaced safety wire grooves For twist throttle use only
Used by top racers worldwide. Brushguard kit of injection-molded, high-impact plastic with forged aluminum shield mount hardware. Stainless steel bolts and aluminum washers Fits all oversized and 7/8 in.diameter bars Shields hands from roost
Micro grips are purpose-built for the Micro Handlebar, our revolutionary control system for youth riders. The exclusive mold incorporates an oversized tip to resist crash damage and prevent smaller hands from slipping off. For twist throttle use only Designed specifi cally for our Micro Handlebar (also fi ts stock CRF50F and PW50 controls) Exclusive 1/3 Waffle traction pattern Built-in safety wire grooves for added security Super-soft rubber compound to reduce vibration and preserve hands Oversized tips to resist crash damage and improve safety
Universal application fits most offroad bikes. Unique full coverage pivot mount rubber boot keeps assembly debris free. Sealed bearings at lever pivot virtually eliminate friction and provide a smooth, consistent feel. 6061 precision-forged aluminum with ultra durable anodized finish. Available with or without 4-Stroke Hot Start assembly. Exclusive lightweight, low-profile design Durable anodized finish Factory inspired quick adjust star
Inner core compound perfects the bonding interface with bars. Anti-Rip Tip uses denser compound to increase life of grip. Tacky gel-like surface compound is perfect for less arm fatigue. For twist throttle use only
Forged from aluminum alloy, with an oversized 'adjust on-the-fly' style cable adjuster. Sealed pivot bearing creates a smooth lever feel, while rubber boot protects against dirt and debris. Universal fit for most offroad models
Custom Kraton® rubber compound provides long wear and tear resistance. Half-waffle pattern offers great traction and vibration dampening Single Density Soft compound
Universal application fits most offroad bikes. Features exclusive XPS lever and Profile Perch assembly. Unique full coverage pivot mount rubber boot keeps pivot bearings and cable clean. 6061-T6 precision-forged aluminum Factory race team-inspired quick adjust star Two lever reach adjustments give 50mm of tunability Available with 4-Stroke Hot Start assembly
The ProTaper Micro Throttle Tube kit is designed to work exclusively with the ProTaper Micro Handlebar. The downsized design is purpose built to give youth riders a reduced hand-hold area to grasp while riding and racing. By reducing the hand-hold area, youth riders can now grasp the throttle the same way an adult rider grasps a traditionally-sized throttle; resulting in more rider control and drastically reduced hand fatigue. Utilizing a two-piece design, the Micro Throttle Tube can be fitted to any 2-stroke model off-road bike of 85 cc and smaller by using one of the seven optional throttle cams.
Forged from aluminum alloy, with an oversized 'adjust on-the-fly' style cable adjuster. Sealed pivot bearing creates a smooth lever feel, while rubber boot protects against dirt and debris. Universal fit for most offroad models Includes Hot Start
The Twister Throttle Tube from ProTaper is constructed from quality anodized billet aluminum. The sealed radial ball bearing and polymer bushing allow for a consistent and smooth throttle operation while a knurled grip mounting area ensures a vice-like grip bond. The ProTaper Twister Throttle tubes are used by top-level pro teams and riders world wide. Twister Throttle Tubes are compatible with all ProTaper handlebars and Renthal 7/8 in. handlebars with the standard bearing insert. Features a sealed ball bearing that virtually eliminates friction and nylon sleeve bearing on the inboard end Crud plug stops grip glue form ruining bearing All Twister throttle tubes include a free insert for all ProTaper® bars
Constructed of both firm and soft Kraton rubber compounds. Outer casing provides long-lasting wear against tearing. Inner casing provides excellent tackiness and shock absorption. For twist throttle use only
Universal application fits most offroad bikes. Features exclusive XPS lever and Profile Perch assembly. Unique full coverage pivot mount rubber boot keeps pivot bearings and cable clean. 6061-T6 precision-forged aluminum Sealed bearings at pivot virtually eliminate friction and provide a smooth, consistent feel. Slim, lightweight design for the ProTaper Profile Perch
Universal application fits most offroad bikes. Unique full coverage pivot mount rubber boot keeps assembly debris free. Sealed bearings at lever pivot virtually eliminate friction and provide a smooth, consistent feel. 6061 precision-forged aluminum with ultra durable anodized finish. Available with or without 4-Stroke Hot Start assembly. Exclusive lightweight, low-profile design Durable anodized finish Ergonomically shaped Hot Start trigger Factory inspired quick adjust star
Inner core compound perfects the bonding interface with bars. Anti-Rip Tip uses denser compound to increase life of grip. Tacky gel-like surface compound is perfect for less arm fatigue.
Custom Kraton® rubber compound provides long wear and tear resistance. Half-waffle pattern offers great traction and vibration dampening Single Density Soft compound
Universal application fits most offroad bikes. Features exclusive XPS lever and Profile Perch assembly. Unique full coverage pivot mount rubber boot keeps pivot bearings and cable clean.
Universal application fits most offroad bikes. Features exclusive XPS lever and Profile Perch assembly. Unique full coverage pivot mount rubber boot keeps pivot bearings and cable clean. 6061-T6 precision-forged aluminum Sealed bearings at pivot virtually eliminate friction and provide a smooth, consistent feel. Slim, lightweight design for the ProTaper Profile Perch
Trials specific full diamond pattern and flange. Designed to allow ease of repositioning hands to grip. Special compound perfects the bonding interface with bars. Works with twist throttle applications only
Forged from aluminum alloy, with an oversized 'adjust on-the-fly' style cable adjuster. Sealed pivot bearing creates a smooth lever feel, while rubber boot protects against dirt and debris. Universal fit for most offroad models Replacement Lever
Universal application fits most offroad bikes. Features exclusive XPS lever and Profile Perch assembly. Unique full coverage pivot mount rubber boot keeps pivot bearings and cable clean. 6061 precision-forged aluminum Durable anodized finish
Universal application fits most offroad bikes. Features exclusive XPS lever and Profile Perch assembly. Unique full coverage pivot mount rubber boot keeps pivot bearings and cable clean. Includes adjuster assembly, pivot bolt, nut and both rubber boots
The Twister Throttle Tube from ProTaper is constructed from quality anodized billet aluminum. The sealed radial ball bearing and polymer bushing allow for a consistent and smooth throttle operation while a knurled grip mounting area ensures a vice-like grip bond. The ProTaper Twister Throttle tubes are used by top-level pro teams and riders world wide. Twister Throttle Tubes are compatible with all ProTaper handlebars and Renthal 7/8 in. handlebars with the standard bearing insert. Features a sealed ball bearing that virtually eliminates friction and nylon sleeve bearing on the inboard end Crud plug stops grip glue form ruining bearing All Twister throttle tubes include a free insert for all ProTaper® bars
Introducing the all new Pro Series Clamp-On Grip System - the ultimate blend of comfort, performance, and ease of installation. This innovative grip system offers the trusted performance and comfort of our Race Cut Traditional grips, now with a convenient clamp-on design for quick, secure setup. Engineered to prevent slipping, the Pro Series Clamp-On grips fit seamlessly on all your favorite ProTaper handlebars, giving you confidence on every ride. Tapered end provides a tight fit Increased rubber thickness to offer comfort and reduce fatigue Extra-supple, tacky grip compound is bonded to the core to prevent slippage Updated pattern improves upon the comfort and performance of our Race Cut traditional grips Durable polypropylene core
Adapts solid mounted triple clamp bar mounts from 7/8 in. to 1-1/8 in. Precision CNC-machined, aircraft-grade aluminum Adds 3/4" to rise of handlebars Bar pad not included
